Forgot your password?
New user?
Vehiport - New Club Member Discount
35.90%
how many psi could a tt 180 run with a boost controller
Up to Audi TT Forum
Re: how many psi could a tt 180 run with a boost controller
Posted by
Alec kerchner
at
August 14. 2010
Previously Jose Serna wrote:
><p>how many lbs could i push if i add add a boost c. on a 180 with intake, forge dv and 3'' exhaust<br >
><blockquote>
Re: how many psi could a tt 180 run with a boost controller
Posted by
Alec kerchner
at
August 14. 2010
Previously Jose Serna wrote:
><p>how many lbs could i push if i add add a boost c. on a 180 with intake, forge dv and 3'' exhaust<br >
><blockquote>
Re: how many psi could a tt 180 run with a boost controller
Posted by
odachimaster
at
August 22. 2010
you will run in the low 20's there really isn't any reason to go above 24 anyway.
Re: how many psi could a tt 180 run with a boost controller
Posted by
MIchael G. Forakis
at
October 05. 2010
You can't run anything past 11.4 until you clamp your MAP sensor or you will throw codes and limp all over the place.
I was boosting at 20(peak) and held at 18psi with nothing but my clamped MAP sensor but it would hit fuel cut on a hill. Would recommend you buy a 4bar fuel pressure regulator so you have enough fuel pressure for the boost increase.
The best horsepower gains with stock turbos come from a good Flash and injectors and whatever they recommend with the flash program.