Forgot your password?
New user?
Vehiport - New Club Member Discount
35.90%
Lowering my TT
Up to Audi TT Forum
Posted by
Hello everyone,
I just lowered my tt with eibach prokit and Koni springs, of course now there’s huge negative camber on my rear wheels. -2.4 left and -3.2 right. I did a search in the forum and seems like some of you guys installed adjustment bars and some used the Kmac. I like to use the Kmac because it’s cheaper but here’s my question: do I need a full kit which is two parts for each side Or can I get away with just buying a half kit?
Thanks
zod
I just lowered my tt with eibach prokit and Koni springs, of course now there’s huge negative camber on my rear wheels. -2.4 left and -3.2 right. I did a search in the forum and seems like some of you guys installed adjustment bars and some used the Kmac. I like to use the Kmac because it’s cheaper but here’s my question: do I need a full kit which is two parts for each side Or can I get away with just buying a half kit?
Thanks
zod
Zod.....How have you progressed on the negative camber problem. I just installed new tires and alignment and discovered the out-of-spec rear camber with no adjustment available. Please advise your solution and results.
I lowered my TT225 with bilstein pss9s... all the way. So about a 2inch drop. I used ECS Tuning adjustable tie bars, and being lowered so much, I had to replace the UPPER TIE BAR (not the lower) to get enough camber correction. As for the toe, thats a whole other problem. We had to hydraulically spread the toe-adjustment mounts to get my toe back in spec!